MXS 1.2 Strada, the evolution of MXS Strada, is a 5" color display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and - optionally - the GPS08 Module.
 |
 |
 |
 |
 |
| ECU connection | Analog/digital inputs | Math channels | Second CAN | GPS08 Module |
MXS 1.2 Strada is available in two versions:
With the CAN Output you can send messages directly
to an existing CAN network in order to improve
the range of vehicle control possibilities.
MXS 1.2 Strada shows, together with RPM scale, all the
data you need, like speed, water temperature
and oil pressure, laptimes and much more...
You can choose the custom pages you wish
among a wide library of page styles,
defining which data to be shown,
their end of scale and measure units.
Swapping between pages is quite
easy using the pushbuttons.
|
Digital output MXS 1.2 Strada features a LOW SIDE type More info |
 |
|
Camera inputs, also for mirror camera Two analog camera inputs are available, |
 |
A modular systemUsing the built-in CAN bus you can add expansion modules to visualize additional info: |
|
|---|---|
|
Thanks to GPS08 Module (included in the kit) and its Race Studio 3 software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique. |
 |
|
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed. |
 |
|
It adds 4 K thermocouples. |
 |
|
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. |
 |
|
SmartyCam HD cameras The on-board cameras that overlays on videos the data sampled by your logger. SMARTYCAM GP HD Rev. 2.2 |
 |
These are only some of the items that can be added to our MXS 1.2 Strada for incrementing the performance
and the data acquired:
MXS 1.2 Strada is to be configured via Race Studio 3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.
AiM MXS 1.2 Strada Website Product Description.
| Display | 5” TFT |
| Resolution | 800x480 pixels |
| Contrast | 600:1 |
| Brightness | 700cd/m2 - 1,100 Lumen |
| Ambient light sensor | Yes |
| Alarm LEDs | 6 RGB freely configurable |
| Shift lights | 10 integrated freely configurable RGB LEDs |
| CAN connections | 2 |
| ECU connections | CAN, RS232 or K-Line |
| ECU compatibility | + 1,000 industry leading ECUs |
| Expansion CAN connection | GPS, Channel Expansion, TC Hub, Lambda Controller, SmartyCam HD |
| Analog inputs | 8 fully configurable, max 1,000 Hz each |
| Digital inputs | 1 speed input, coil RPM input |
| Digital outputs | 1 (1 A max) |
| Second CAN | Yes |
| Body | Anodized Aluminum |
| Pushbuttons | Metallic |
| Connectors | 2 AMP connectors + 1 Binder connector |
| Power consumption | 400 mA |
| Dimensions | 169.4x97x23 mm |
| Weight | 480 g |
| Waterproof | IP65 |
IN THE BOX
MXS 1.2 Strada, USB cable, 14 pins standard wiring, 23 pins connector + contacts, software installation CD.ACCESSORIES
|
23 pins AMP connector wiring for MXS Strada - Standard version Part number: V02573220 |
 |
|
Infrared optical receiver 90 cm lenght Part number: X41RX19090 |
 |
|
Infrared optical receiver 3 m lenght Part number: X41RX19300 |
|
 |
|
|
Single RearMaster mirror camera patch cable |
 |
SPARE PARTS
|
Part number: V02573320 |
 |
|
Part number: V02573340 |
 |
|
14 pins connector + contacts Part number: 5CND7762732 + 5CT0770520 |
 |
|
23 pins connector + contacts Part number: 5CND7706802 + 5CT0770520 |
 |
|
Part number: V02573030 |
 |
|
USB Cable Part number: X90TMPC002 |
 |
|
Part number: V02573200 |
 |
