MXP Strada is a 6" colour display with great visual impact, configurable to show lap times and all the info coming from the Engine Control Unit, analog/digital inputs, pre-defined math channels and - optionally - the GPS08 Module.
 |
 |
 |
 |
 |
|
Analog/digital inputs |
Math channels |
Second CAN |
GPS08 Module |
MXP Strada is available in two versions:
You can define all the custom pages you wish,
choosing among a wide library
of page styles, defining which data
to be shown, their end of scale and measure units.
Swapping between pages can be managed
pushing one or two pushbuttons.
A high contrast TFT display identifies
MXP at the first glance.
An ambient light sensor keeps
the backlight at optimum brightness levels.
MXP Strada, in its standard version, features five configurable RGB alarm LEDs: you choose the conditions, you choose the colors.
Select a solid alarm or flashing one - and the flashing frequency, choose to have an accompanying text message, and set the alarm priorities. Furthermore you can select the street icons you need among the wide list you will find in "Race Studio 3 - Icons Management" and set them up the way you prefer or according with your needs. Any of them is fully configurable and if this shouldn't be enough, you will be able to upload and set up your own customized icons.
|
Two digital outputs MXP Strada features a LOW SIDE type |
 |
|
Camera inputs, also for mirror camera Two analog camera inputs are available, |
 |
Integrated shift light arrayChoose from a host of advanced multicoloured RGB shift light patterns that can be customized as you like, and for each unique gear when required. |
|
Expand the system, according to your needsUsing the built-in CAN bus, you can add expansion modules to the MXS to increment the performance and the data acquired: |
|
|---|---|
|
Thanks to GPS08 Module (included in the kit) and its Race Studio 3 software, you can immediately get laptimes and all data needed for engine tuning as well as for improving driving technique. |
 |
|
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed. |
 |
|
It adds 4 K thermocouples. |
 |
|
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion. |
 |
|
SmartyCam HD cameras The on-board cameras that overlays on videos the data sampled by your logger. SMARTYCAM GP HD Rev. 2.2 |
 |
With the CAN Output you can send messages directly
to an existing CAN network in order to improve
the range of vehicle control possibilities.
MXP Strada is to be configured via Race Studio 3: you can create, modify, delete, import and export configurations with all channels, ECU drivers, Math channels, Display Pages, Digital output, Alarms, Shift Lights and all the expansions you need.
|
In the Box
MXP Strada, USB cable, 14 pins standard wiring, 23 pins connector + contacts, software installation CD.ACCESSORIES
|
23 pins AMP connector wiring for MXS Strada - Standard version Part number: V02573220 |
 |
|
Infrared optical receiver 90 cm lenght Part number: X41RX19090 |
|
|
Infrared optical receiver 3 m lenght Part number: X41RX19300 |
|
 |
|
|
Single RearMaster mirror camera patch cable |
 |
SPARE PARTS
|
Part number: V02573320 |
 |
|
Part number: 5CND776273 + 5CT0770520 |
 |
|
Part number: 5CND770680 + 5CT0770520 |
 |
|
Part number: V02573030 |
 |
|
USB Cable Part number: X90TMPC002 |
 |
|
Part number: V02573200 |
 |
